• Easy to handle and straightforward to install.
• Prevents snow/tile slippage.
• 2m wide x 150mm high.
• Brackets should be fitted at a maximum of 800mm centres, using two no. 12 x 1½” round head screws.
• Galvanised finish, for long lasting performance.
• Protects conservatories from falling roof tiles.
• Assists in reducing insurance costs/claims caused by snow/tile damage.
• Only suitable for fascias that are 175mm or deeper.

Extreme weather conditions – Snow loading

FloPlast’s Rainwater Systems are manufactured tested and accredited to the BS EN 12200, BS EN 607 and
BS EN 1462 the relevant British Standards for rainwater systems within the UK. As a part of our Kitemark
accreditation FloPlast’s fascia brackets are tested by British Standards in accordance with BS EN 1462,
Clause 6.2 “Load bearing Capacity” and continue to meet the requirements of this clause.

Fact: The loading requirement of the British Standard is that brackets should be able to hold 75Kg of weight at the designated design centres, i.e. one metre apart (or whatever the distance is determined in our literature, different systems, different centres).

Fact: One square metre of snow, 300mm (12”) deep, weighs in the region of 96Kg. Average semi-detached house @ 30m2 x 96kg = 2.8 tonnes of snow.

Fact: Rain following snow escalates the situation, as the snow is like a large sponge, soaking up the rain.

Snow slippage is particularly evident where smooth roofing materials such as slate have been installed. For additional security FloPlast strongly recommend the installation of Snow Guard which facilitates the retention of snow, allowing slow melt, rather than slippage. In areas where there is the possibility of high levels of snowfall, fascia brackets should be spaced at a maximum of 400mm centres.